RBC-3400 Resin

Electronics
, Potting & Encapsulating
4 hours
Pot Life
2,900
Mixed Viscosity (cps)
85
Hardness (Shore D)
-55 to 150
Operating Temperature Range (°C)

RBC-3400 is a filled, low viscosity, general purpose epoxy potting resin (epoxy potting compound) and epoxy casting resin. Its physical and electrical properties are similar to RBC-3300 Resin, but RBC-3400 offers superior wetting characteristics when potting and encapsulating intricate components. It can be cured at room temperature or elevated temperatures, depending upon the epoxy hardener selected and the heat resistance of the part.

HANDLING PROPERTIES:

Mixed Viscosity @ 25oC, cps: 2,900

Shelf Life, (closed Container @ 25oC): 12 months

PHYSICAL PROPERTIES (CURED):

Color: Black
Specific Gravity @ 25oC: 1.45
Hardness, Shore D: 85
Linear Shrinkage, in./in.: 0.003
Moisture Absorption 10 Days @ 25oC, %: 0.29
Izod Impact Strength, ft. lbs./in. of notch: 0.29
Tensile Strength @ 25oC, psi: 6,060
Compressive Strength @ 25oC, psi: 17,300

THERMAL PROPERTIES (CURED):

Thermal Conductivity, cal/sec/cm2/oC/cm X 10-4: 7.8
Thermal Stability, 1000 Hrs. @ 175oC, % Wt. Loss: 0.50
Coefficient of Thermal Expansion, in./in./oC X 10-6: 39
Heat Distortion Temperature, oC: 130
Operating Temperature Range, oC: -55 to 155

ELECTRICAL PROPERTIES (CURED):

Volume Resistivity @ 25oC, ohm-cm: 8×1016
Dielectric Strength, volts/mil: 475
Dielectric Constant @ 25oC, 100 KC: 4.1
Dissipation Factor @ 25oC, 100 KC: 0.022

(Note: The above properties are typical of a system cured with hardener #AB-312.) 

RECOMMENDED HARDENERS:

AB-56: A fast, room temperature curing system with good chemical and thermal properties.

A-110: A rigid, room temperature curing system with limited pot life and fast cure.

A-120: A resilient, low viscosity system with slightly longer pot life, that exhibits excellent resistance to thermal shock.

AB-312: Good resistance to heat, chemicals, thermal and mechanical shock, and good electrical properties at high humidity.

MIXING INSTRUCTIONS:

Weigh the desired amount of #3400 Resin into a clean container and combine with recommended hardener in one of the ratios shown below.

Hardener Parts by Weight
per 100 pts. Resin
Pot Life 
100 grams @ 25oC
AB-56 25 25 minutes
A-110 7 1 hour
A-120 15 2 hours
AB-312 16 2 hours

RECOMMENDED CURE SCHEDULE

Hardener Cure @ 25oC Cure @ 65oC Cure @ 100oC Cure @ 130oC
AB-56 24 hours 1 hour
A-110 24 hours 2 hours
A-120 24 hours 2 hours
AB-312 6 hours 3 hours 2 hours